FEATURES :
Bevelling length/min                                                             : 2.6 Mtr 
Max. Bevel depth in mild steel(U.T.S. 40 kg/sq.    mm)    : 12 mm 
Stainless Steel Meterial(U.T.S 50 kg/sq. mm)                    : 10 mm 
Bevelling angle/Standard                                                     : 30 
Plate thickness                                                                       : 6-40 mm 
Bevelling tube min.  inner dia.                                             : 100 mm

Model EDPL-12 can bevel the plates/pipes at a speed of 2.6 M/Min. With 12  mm depth in 6-40 mm min.thick, mild steel /aluminum material/10 mm thick stainless steel.

Standard machine is provided with 30 bevel angle device.37.5 ,45 and other varying device can be supplied at an extra cost.

Advantages of plate edge preparation by milling operation on EDPL-12 machine v/s flame bevelling:

1.Milling cutters bevel, clean accurate angular edge on straight or circular section.2.Once the cut starts, the cutting force will propel either the machine or the job whichever is lighter.3.As machine is self  propelled, one operator can supervise bevelling operation.4.More accurate bevel angles, saves grinding/reworking cost. No thermal distortions.5.Bevels at 2.6 M/Min which is much faster than flame cutting speed of  0.3 M/Min.