E A F   C A B L E  –  C O V E R  ™

Fabricated  with  96 oz. Pyroblanket, EAF  Cable Cover is designed specifically to protect water cooled power cables on Electric Arc Furnaces.

Using  96 oz. Pyroblanket, a custom  fitted sleeve is  fabricated  with  a  Nomex®  hook and loop closure. EAF  Cable-Cover can  be installed without disconnecting the water cooled cables.

EAF  Cable - Cover can  withstand  the heat, abrasion, bumping, flame  and  molten  metal  splash normally encountered in  both  AC and DC  EAF  furnace operations.  Even  splashes  encountered  during  wet  charges  are  repelled,  allowing  for  continued  operation  of  the  EAF  without unexpected cable failures.

EAF  Cable-Cover  is  non-conductive  and  will  not  affect  the magnetic induction of  the  furnace. Available in a full range of sizes up to 12” (305 mm) diameter.

R E M O V A B L E   I N S U L A T I O N   B L A N K E T S

Fabricated   from  32 oz. Pyroblanket  and  fiberglass/silica/ceramic  internal  insulation,  Insulflex Removable Insulation Blankets are made to the most exacting standards.

Ideal for marine, industrial, off-highway and power generation use, Insulflex Removable Insulation Blankets are custom made to meet the conditions of the most demanding applications.

Custom in-house fabrication facilities allow Insulflex Removable Insulation Blankets to be supplied in large or small quantities, with a variety of closure systems, and in almost any size.

BACK