ELEKTROMAG-METOOL Products' range of
dispensing hose reels are ideal for heavy duty use in
maintenance shops, garages, work shops and industrial units.
The spring operated reels are constructed from
one piece heavy gauge drum
halves to give maximum mechanical strength and are supplied with
a robust roller guide and stopcatch to relieve tension.
The product consists of a minimum number of
components and is maintenance
-free as the drum
revolves on a pair of ball races which are sealed for life.
Another important advantage is that
ELEKTROMAG-METOOL dispensing hose reels are
extremely mobile. Consequently, they can be used in
the servicing of heavy construction equipment-on site
which reduces expensive 'downtime' considerably.
ELEKTROMAG-METOOL hose reels can dispense air, water, grease, steam, oil, electricity, gas, oxy-acetylene and petrol.
- Supplied complete with hoses or cables.
- Self-retracting... for ease of operation.
- Can be truck mounted to operate any where-anytime.
- Up to 1 1/2" bore.
- Nylon Rollers.
- Ensures increased productivity.
- Reduces wear and tear.
- Leaves clear floor space.
DIMENSIONS
| Reel Type | A | B | C | D | E | F | G | H | I | J | K | L | M | N | O | P(Male) |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| SH18/1A | 314 | 180 | 347 | 228 | 118 | 177 | 111 | 190 | 110 | 3 | 100 | 23 | 90 | 27 | 11 | 1/4" BSP |
| SH30/1V | 514 | 315 | 567 | 243 | 125 | 256 | 204 | 310 | 150 | 5 | 100 | 65 | 136 | 45 | 11 | 1/4"- 1/2"BSP |
| SH30/1V | ||||||||||||||||
| SH30/1V | ||||||||||||||||
| SH40/1R | 616 | 391 | 703 | 386 | 222 | 316 | 237 | 395 | 210 | 6 | 200 | 36 | 255 | 36 | 11 | 1/4"- 3/4"BSP |
| SH40/1R | ||||||||||||||||
| SH40/1R | ||||||||||||||||
| SH40/1P | ||||||||||||||||
| SH75/1B | 1016 | 754 | 1134 | 542 | 284 | 533 | 444 | 626 | 314 | 6 | 290 | 55 | 300 | 56 | 17 | 3/4"- 1 1/2"BSP |
| SH75/1B | ||||||||||||||||
| SH75/1B | ||||||||||||||||
| SH75/1B |
CAPACITY CHART
The Capacity Chart is based on a general purpose textile braided hose with the reels and hoses being suitable for conveying either air or water.
The reels are suitable for mounting upto 3m above ground level.
| Hose Bore | 1/4" | 3/8" | 1/2" | 3/4" | 1" | 1 1/4" | 1 1/2" |
|---|---|---|---|---|---|---|---|
| Dia mm: Wt.kg/m: | 15.0 0.23 | 19.0 0.29 |
22.0 0.32 | 29.0 0.48 | 36.0 0.71 |
45.0 1.08 | 51.0 1.24 |
| Pressure Bar | 20 | 20 | 12 | 12 | 12 | 12 | 12 |
| Length M | |||||||
| 9 | SH18/1A | SH30/1V | SH30/1V | SH40/1P | SH75/1B | SH75/1B | SH75/1B |
| 10 | SH30/1V | SH30/1V | SH30/1V | SH40/1P | SH75/1B | SH75/1B | SH75/1B |
| 12 | SH30/1V | SH30/1V | SH30/1V | SH40/1P | SH75/1B | SH75/1B | SH75/1B |
| 14 | SH30/1V | SH30/1V | SH30/1V | SH40/1P | SH75/1B | SH75/1B | SH75/1B |
| 16 | SH30/1V | SH30/1V | SH30/1V | SH40/1P | SH75/1B | SH75/1B | SH75/1B |
| 18 | SH30/1V | SH30/1V | SH30/1V | SH40/1P | SH75/1B | SH75/1B | SH75/1B |
| 19 | SH30/1V | SH30/1V | SH30/1V | SH40/1P | SH75/1B | SH75/1B | SH75/1B |
| 20 | SH40/1R | SH40/1R | SH40/1R | SH75/1B | SH75/1B | SH75/1B | SH75/1B |
| 22 | SH40/1R | SH40/1R | SH40/1R | SH75/1B | SH75/1B | SH75/1B | SH75/1B |
| 24 | SH40/1R | SH40/1R | SH40/1R | SH75/1B | SH75/1B | SH75/1B | SH75/1B |
| 26 | SH40/1R | SH40/1R | SH40/1R | SH75/1B | SH75/1B | SH75/1B | SH75/1B |
Note : The design and dimensions are subject to alterations without prior notice due to constant development for better performance.ELEKTROMAG METOOL Hose Reels automatically take care of the hose which is not in use. There is less wear and tear on the hoses when they do not have to be dragged around the floor or driven over by trucks and other vehicles. Fewer chances of accidents due to employees tripping over hoses. The savings on expensive hoses alone pays for the cost of the Hose Reel.