Limit Switches



GEARED ROTARY SHUNT LIMIT SWITCH
TYPE: 'CIGRLS'
  & , Mumbai.


APPLICATION : For Hoist drives, used in control circuit.
GEAR RATIO : 48:1 or 36:1
CONTACT SEQUENCE: 2 NC.
CURRENT RATING: 40 AMPS AT 500 V.A.C.
ENCLOSURE : CAST IRON, IP-55.

Note: Any Gear Ratio and Contacts upto 8 Nos. can be offered on request.


2 WAY ROLLER LEVER SHUNT LIMIT SWITCH
TYPE: 'CISLS'
& .


APPLICATION : For Over Travel and Over Traverse, used in control circuit.
CONTACT SEQUECE: 2 NC.
CURRENT RATING: 40 AMPS AT 500 V.A.C.
ENCLOSURE : CAST IRON, IP-55.
LEVER POSITION:Upwards (Downwards can also be supplied on request)


GEARED ROTARY SHUNT LIMIT SWITCH
TYPE : 'GRLS'
& .


APPLICATION : For Hoist drives, used in control circuit.
GEAR RATIO : 48:1 or 36:1
CONTACT SEQUENCE : 2 NC
CURRENT RATING : 40 AMPS AT 500 V.A.C.
ENCLOSURE : Sheet Metal, Dust & Weather Proof.

Note : Any Gear Ratio and Contacts upto 8 Nos. can be offered on request.


2 WAY ROLLER LEVER SHUNT LIMIT SWITCH
TYPE: 'SLS'
& .


APPLICATION : For Over Travel and Over Traverse, used in control circuit.
CONTACT SEQUENCE : 2 NC
CURRENT RATING : 40 AMPS AT 500 V.A.C.
ENCLOSURE : Sheet Metal, Dust & Weather Proof.
LEVER POSITION :Upwards (Downwards can also be supplied on request)


2 WAY ROLLER LEVER SHUNT LIMIT SWITCH
TYPE: 'HOM'
  & , Mumbai.


APPLICATION : For Over Travel and Over Traverse, used in control circuit.
CONTACT SEQUENCE : 2 NC
CURRENT RATING : 40 AMPS AT 500 V.A.C.
ENCLOSURE : Sheet Metal,Dust & Weather Proof.
LEVER POSITION : Downwards (Upwards can also be supplied on request)


COUNTER WEIGHT HOIST SHUNT LIMIT SWITCH
TYPE: 'MHLS'
.


APPLICATION : For HOISTING DRIVES.
CONTACT SEQUENCE : 2 NC
CURRENT RATING : 40 AMPS AT 500 V.A.C.
ENCLOSURE : CAST IRON,IP-55.

Note : Hoist Limit Switch with Counter Weight Wire Rope and fasteners for 2 Mtrs. suspension can be supplied at extra cost.


2 WAY ROLLER LEVER SERIES LIMIT SWITCH
TYPE: '2WLS'
Mumbai.


APPLICATION : For Over Travel and Over Traverse, used in control circuit.
CONTACT SEQUENCE : 4 NC
CURRENT RATING : 60 AMPS AT 500 V.A.C.
ENCLOSURE : Sheet Metal,Dust & Weather Proof.
LEVER POSITION : Normally downwards (Upwards can also be supplied on request)


COUNTER WEIGHT OPERATED HOIST LIMIT SWITCH
TYPE: 'HLS 60'
.


APPLICATION : For HOISTING DRIVES.
CONTACT SEQUECE : 2 NC
CURRENT RATING : 60 AMPS AT 500 V.A.C.
ENCLOSURE : Sheet Metal,Dust & Vermin Proof.

Note : Hoist Limit Switch with Counter Weight Wire Rope and fasteners for 2 Mtrs. Suspension can be supplied at extra cost.


PULL CORD LIMIT SWITCH
TYPE: 'PCLS' (ROPE OPERATED)
.


APPLICATION : TO STOP THE MOTION OF BELT CONEYOR, used in control circuit
CONTACT SEQUENCE : 1 NO + 1 NC
CURRENT RATING : 40 AMPS AT 500 V.A.C.
ENCLOSURE : CAST IRON,IP-55.


2 WAY ROLLER LEVER TRACK LIMIT SWITCH
TYPE: 'VLS'
Mumbai.


APPLICATION : For Over Travel and Overse.
CONTACT SEQUENCE : 1 NO+1NC, 2NO+2NC,(Maximum 4 Contacts)
CURRENT RATING : 40 AMPS AT 500 V.A.C.
ENCLOSURE : CAST IRON,IP-55.


BELT SWAY SWITCH
TYPE: 'BSLS'
Mumbai.


APPLICATION : Operates when belt sways in a Belt Conveyor,used in control circuit.
CONTACT SEQUENCE : 1 NO + 1 NC
CURRENT RATING : 40 AMPS AT 500 V.A.C.
ENCLOSURE : CAST IRON, IP-55.


2 WAY ROLLER LEVER TRACK LIMIT SWITCH
TYPE: 'RLR'
Mumbai.


APPLICATION : For Over Travel and Overse Traverse.
CONTACT SEQUENCE : 1 NO+1NC, 2NO+2NC, (Maximum 4 Contacts)
CURRENT RATING : 40 AMPS AT 500 V.A.C.
ENCLOSURE : CAST IRON,IP-55.


Note : The designs and dimensions are subject to alterations without prior notice due to constant development for better performance.
E.O.T Crane Control Gear Equipment