LIFTING MAGNETS  DATA  SHEET

Name                  :                                                    

Company           :             Designation :

Address             :                     Pincode :   

 Telephone        :            Fax No. :                    Email id :

 Industry Type :

PLEASE  FURNISH  FOLLOWING  INFORMATION  TO  RECOMMEND  APPROPRIATE  LFTING  MAGNETS.

Kind of Crane Available :

                  Lifting power :   Lifting Height :    Working Cycles of Crane :

           Current available :                     Voltage :                                     Frequency :

Maximum Lifting Speed :                                                           Maximum Lowering Speed :

        Place of Installation :             Ambient Temperature :  

A-Material       Select Scraps Pig Iron Chips Mixture of metals                                                       Density : (Indicate Density if available)

Temperature Of Material :                              Weight per Lift desired :

Minimum amount of Material to be handled per time unit :

B-Material Select Arranged Stored as metal plates Billets Sectional iron ingots Slabs Mixture of metals

Note : Fill in the Dimensions for the above selected material.
            If you have selected Mixture of Metals then please mention Dimensions for all the metals below.

Ingots / Slabs  : Cross-Section     Length

Sectional Iron : Select Piled Up Loosely Bundled          Type             Length

Billets             : Select Piled Up Loosely Bundled         Type             Length

Metal Plates  : 
Maximum Length                  Minimum Length
Maximum Width                    Minimum Width  

Number per Lift :                     Maximum number of metal plates per Lift :