ELEKTROMAG have been manufacturing Parabolic Louvres since the beginning of 1997 in technical Collaboration with M/s. METAPRINT LIMITED, U.K. The special purpose machinery and tooling for this project have been imported from the best available suppliers in the world and installed and commissioned under their technical supervision and guidance. The Louvres will be supplied by us in completely knocked down form (CKD) for economy in handling and transportation with minimum risk of damage in transit. The CKD louvres can be easily assembled by the customer as all components will interlock manually. However, Louvres can be supplied in assembled condition if desired by the customer.

Our standard range of louvres includes a wide range of complete tooling options.
The standard louvre system has a built in flexibility that facilitates many combinations of lengths, widths, spacing between cross-blades and total height from any Elektromag's pre-anodised aluminium finish.

LOUVRES FOR VDU ENVIRONMENT: 
This range of Louvres will include highly specular DOUBLE PARABOLIC wedge cross blades and parabolic sides and centre reflectors.
The standard range of Louvres  manufactured by us are used in areas where there is a fairly widespread use of computers.
We can also manufacture and supply Louvres with provision for partial uplighting. A range of Louvres for T-5 lamps is also available.

LOW BRIGHTNESS RIBBED LOUVRES : 
This range of Louvres also includes highly specular parabolic sides and centre reflectors with optically profiled facetted cross blades (Christmas Tree Profile). These types of Louvres are more economical than the double parabolic louvres as described above. They are suitable for general purpose applications such as retail areas, reception areas, open areas, store rooms, etc.

MATERIAL USED :  
Mirror finished / Matt finished / Optically profiled (Christmas Tree) material manufactured by M/s. ALMECO S.p.A., ITALY.