Questionnaire For Master Controller
(SINGLE BREAKS CONTACTS)
TYPE : OD
| CONTACT RATING | : | 40 Amps. at 415 V.A.C. 1 Amp. at 415 V.D.C. |
| CAMS | : | Upto 24 Cams |
| STEPS | : | Upto Six |
| SPECIFICATION | : | IS: 1822-1967 |
SWITCHING SEQUENCE: As required by the clients. Sequence to be submitted alongwith the enquiry or order.
HOUSING: Sheet Steel enclosure with easily removable cover, with ample area for easy maintenance. DUST PROOF arrangement with cable glands can be provided at extra cost.
CAMS: Special grade nylon moulded cams are provied which can be easily removed without removing the complete shaft.
CONTACT BLOCK: The block is also of special grade moulded nylon and fitted with a unique silver cadmium oxide contact tips. The contact blocks are easily removable for replacement by unscrewing just one screw.
DEAD MAN'S HANDLE and Spring Return to "zero" position can also be provided at extra cost if required by clients.
| Computer Code | Cams |
| EMBOD3 | 3 |
| EMBOD4 | 4 |
| EMBOD5 | 5 |
| EMBOD6 | 6 |
| EMBOD7 | 7 |
| EMBOD8 | 8 |
| EMBOD9 | 9 |
| EMBOD10 | 10 |
| EMBOD11 | 11 |
| EMBOD12 | 12 |
| EMBOD13 | 13 |
| EMBOD14 | 14 |
| EMBOD15 | 15 |
| EMBOD16 | 16 |
JOY STICK MASTER CONTROLLER
(SINGLE BREAKS CONTACTS)
TYPE : JS
| CONTACT RATING | : | 40 Amps. at 415 V.A.C. 1 Amp. at 415 V.D.C. |
| CAMS | : | Upto 24 Cams. Available for single or dual operation. |
| STEPS | : | Upto Six |
| SPECIFICATION | : | IS: 1822-1967 |
SWITCHING SEQUENCE: As required by the clients. Sequence to be submitted alongwith the enquiry or order.
HOUSING: Sheet Steel enclosure with easily removable cover for easy maintenance. DUST PROOF arrengement with cable glands can be provided at extra cost.
CAMS: Special grade nylon moulded cams are provided which can be easily removed without removing the complete shaft.
CONTACT BLOCK: The block is also of special grade moulded nylon and fitted with a unique silver cadmium oxide contact tips. The contact blocks are easily removable for replacement by unscrewing just one screw.
Spring Return to "zero" position can be provided at extra cost.
CONTROL DESK, ARMCHAIR, GRAB HOIST Master Controllers are also
manufactured if required by clients.
To be cut as per sequence required at site by clients. Quantity depends on
the number of cams.
Quantity depends on the number of cams in the master controller being used.
TYPE : OD AND JS
UNCUT NYLON CAM
CONTACT BLOCK
Note : The design and dimensions are subject to alterations without prior
notice due to constant development for better performance.