"ELEKTROMAG" Stall Torque Motors are used for applications where motors need to be continuously energised at standstill and still provide constant torque e.g. Reeling Drums for cables, hoses, wire ropes etc.

SQUIRREL CAGE Stall Torque Motors are used in applications which involve small payout of cables/hoses.

SLIPRING Stall Torque Motors are used for applications where high thermal losses associated can be dissipated in the externally connected resistances. In addition these have the advantage of possible speed control by switching in and out differing resistance values. Higher torques can be achieved with intermittent duty or with external ventilation.

"ELEKTROMAG" Stall Torque Motors have builtin disc brakes which eliminate the problems of dust clogging encountered in conical brakes.

The motors can be supplied for an operating voltage of 415V/240V 50c/s supply and for ambient temperature upto 60ºC .

These motors can be supplied for horizontal mounting, base mounted (B3 construction) or flange mounted (B5 construction) depending on requirement.

The motors are rated for continuous duty. The motors conform to IP55 protection and are class 'F' insulated.

SELECTION CHART FOR SQUIRREL CAGE TORQUE MOTORS

Apart from our standard range of motors, we can manufacture motors as per customers requirement.

FLAME PROOF MOTORS suitable for gas group I, IIA & IIB are manufactured by us and duly tested and certified by CMRS for use in coal mines, washeries, petrochemical and other hazardous chemical plants.

HIGH TORQUE/SLIP MOTORS are manufactured for application in winches, power presses etc.

LOOM MOTORS for textile industry are manufactured by us.

MOTOR ACTUATORS for operating valves for accurate positioning, opening and closing for rotory as well as linear movements can be designed and manufactured by us.

HIGH FREQUENCY MOTORS to work on 100 Hz, 150 Hz, 200 Hz can also be manufactured.

THRUST MOTORS for use in hydraulic systems can also be manufactured. We have successfully designed thrust motors for developing thrust upto 500 kg and are in a position to develop higher thrust motors as per customers requirements and specifications. Complete hydraulic power pack units for these motors can be supplied with mounting dimensions as required by clients.

IMPORT SUBSTITUTION of motors can also be undertaken and we have repaired several imported motors. Motors used in Consumer Industries can also be designed, developed and manufactured by us.

All our motors can be tested by any recognised Test Houses, Institutions as per customers choice.