P Y R E F L E C T ™     B L A N K E T Pyreflect  blanket  is  constructed  from  2  layers of  aluminium coating  and a protective film, all  laminated  to a heavy  grade aramid fiber blanket with a heat stable adhesive.  The aluminium layers will not delaminate from the aramid fiber blanket, even under the most extreme heat conditions. Tested  at  3000°F (1650°C)  for 1 minute, Pyreflect  blanket will reflect at least 90% of the radiant heat energy.  Pyreflect  blanket is the ideal  choice  where occasional infrared (radiant) heat flow must be blocked or stopped.  Pyreflect’s mirror-like surface finish reflects heat away from the fabric, instead of absorbing the heat and transferring it through the fabric. Pyreflect  blanket  is  sold  in rolls 40”(1016 mm)  wide, or  can be custom fabricated into   almost  any  shape  complete  with  closures. It  can  also  be  supplied   with  factory  installed  grommets  to  your  specifications.

P Y R E F L E C T   ™     S L E E V E Pyreflect  sleeve is fabricated  from  Pyreflect  blanket, and  constructed  by  folding  the blanket over, and  sewing along  the edge.  The edge seams are sewn using high temperature fiberglass thread, and are double-stitched for extra strength. It is the ideal choice for protecting critical hoses, cables or alarm circuitry from occasional flame or radiant heat. Pyreflect  sleeve  can  be  supplied  in  any  diameter  from  3/8” (10 mm)  up to 12”  (305 mm). It  can also be supplied  with  a  VCO  option  where  a  high temperature hook and  loop  closure system  is sewn  inside s the sleeve to allow it be installed without disconnecting hoses or cables.

BACK