Technical Data for Specular and Bright Surfaces - Low Iridescence
SACALL Designation	Mechanical Properties N/mm2			++Total Reflectance DIN 5036/3		++Specular Reflectance* % ISO 7668				30degree Total Reflectance	Image Clarity+ >=	Iridescence
	>=Tensile Strength	Rp0.2>=0.2% Proof Stress/Yield	Elongation	Total(%)	Diffuse(%)	60degree		20degree					Description of Finish
						= Longi- tudinal	Trans	= Longi tudinal	Trans
715.30	150	130	4	86.5	8	81	80	80	79	86	93	2-3	Highly Specular finish
Technical Data for Specular and Bright Surfaces - Standard
740.33	140	120	2	86	18	75	74	75	72	85.5	95	4	Grade II Specular brightened finish
741.33	160	140	2	85	25	74	70	70	68	85	80	4	Grade II Specular brightened finish

Technical Data for Matt and Semi Specular Surfaces
SACALL Designation	Mechanical Properties N/mm2			++Total Reflectance DIN 5036/3		++Specular Reflectance % ISO 7668		30degree Total Reflectance*	Image Clarity+ >=	Iridescence
	>=Tensile Strength	Rp0.2>=0.2% Proof Stress/Yield	Elongation	Total(%)	Diffuse(%)	60degree					Description of Finish
						= Longi tudinal	Trans
606.37	160	140	2	85.5	81	45	27	85.5	-	2	Reflectormatt finish
140.37	160	140	2	85.5	81	46	13	84	-	2-3	Grade II reflectormatt finish
Technical Data for Patterned Surfaces
250.18	170	-	3	74	80	<1.5	-	77	-	1-2	Two sided etched finish-Chritmas Tree profile

The above information is accurate to the best of our knowledge and is based on current data for 0.5 gauge. The properties quoted are intended as a guide and do not contain any form of guarantee.

Aluminium substrates with purity levels between 99.8 and 99.98%, or the appropriate alloys are used in the manufacture of Ano-Fol products.

• + Measured by Dorigon
• * Measured by Technidyne, 30 Degree Total Reflectance.
• ** 0.3 mm gauge only.
• ++ Values given are the typical values for the product.

Iridescence classification

1. No iridescence
2. Low iridescence
3. Limited iridescence
4. Not guaranteed.